How to install electric chain hoist | Loadmate Crane

How To Install A Electric Chain Hoist?

Things to create positive before installation: The electric chain hoist and trolley are prepackaged severally. first, check if the number of the hoist accords with the number of units in the invoice and if their area unit any damages occurred from the transportation or abnormal packing. Also, Check the plate and see if the rated capacity, lifting speed, lifting height, cross traveling speed in addition because the power provide is up to plain. Check if screws of prime hook set are loosed and if the chains are knotted and twisted. 1. Check the track where the hoist and trolley combo is to be mounted: The run track of the hoist adopted is the I- Beam steel. The range of width is 75-180 mm for 1T - 2T and 100-180 mm for 3T-5T. The track for running should be smooth and its swerve radius cannot but the minimum radius stipulated within the plate. the location of axle height at the tip of the track should be mounted a physical property b...

What is Double Girder EOT Crane

Hoist & Trolley: Follow these tips to stay safe

Safety First, Safety Last and Safety Always Danger exists when heavy loads are transported, particularly when the equipment is not being used properly or is poorly maintained. Because accidents and serious injury could result, special safety precautions apply to the operation, maintenance and inspection of LOADMATE hoists and trolleys. Kindly read the below mentioned general care and safety tips to follow before and while operation of LOADMATE Electric Chain Hoist or Electric Trolleys . Before use: Always read the owner`s manual and safety instructions Always check that the hook latches work properly and replace missing or broken hook latches. Never lift more than capacity shown on the hoist name plate Never operate a hoist if damaged or malfunctioning Never use a twisted , kniked, damaged or stretched load chai...

Loadmate

Search This Blog