Skip to main content

Features Of Electric Chain Hoist

 




Features Of Electric Chain Hoist


EURO Chain hoists  with built-in electric trolley is one of the light duty lifting equipment, which consists of two components: one electric chain hoist and one electric trolley. The hoist that can be fixed on single beam bridge cranes and suspended single I-Beam tracks, is widely used for the lifting purpose that occurs in factories, mines, ports, warehouses, building site and etc. They are particularly useful in lower and small room workplaces.

 Features of Electric Chain Hoist:

  • The body of hoist and gearbox of the trolley are made of high strength alloy steel.
  • The guide chain baffles and load wheel made of high-quality steel as well as alloy steel.
  • The forged hook with safety latch and the carbureting chain is high strength grade.
  • The grade two gear drive equipped with limit load device and lift up or down with the adjustable limit switch.
  • The hoists adopt the high start torque columnar rotor motor and the trolleys adopt the brake motor.
  • The push button cord is with 24 voltage for safer handling.
  • Use the lubricating grease of long lifespan without leakage.
  • Low headroom, lightweight, easy operation, safe and reliable.
Labels:

Comments

  1. TreverHarsey4 July 2021 at 03:48

    Its like you read my mind! You seem to know a lot about this, like you wrote the book in it or something. I think that you could do with a few pics to drive the message home a bit, but other than that, this is excellent blog. A fantastic read. I'll definitely be back. fall protection system

    ReplyDelete

Post a Comment

Popular posts from this blog

How To Install A Electric Chain Hoist?

Things to create positive before installation: The  electric chain hoist  and  trolley   are prepackaged severally. first, check if the number of the  hoist  accords with the number of units in the invoice and if their area unit any damages occurred from the transportation or abnormal packing. Also, Check the plate and see if the rated capacity, lifting speed, lifting height,  cross traveling   speed in addition because the power provide is up to plain. Check if screws of prime hook set are loosed and if the chains are knotted and twisted. 1. Check the track where the hoist and trolley combo is to be mounted: The run track of the hoist adopted is the I- Beam steel. The range of width is 75-180 mm for 1T - 2T and 100-180 mm for 3T-5T. The track for running should be smooth and its swerve radius cannot but the minimum radius stipulated within the plate. the location of axle height at the tip of the track should be mounted a physical property b...
12 comments
Read more

#Industry #Cranes #Surat

For companies requiring overhead lifting operations, taking steps to avoid crane failure is critical to ensuring the safety of workers and overall efficiency of operations. No matter the specific  industry  or type of job site, taking a number of simple precautions can greatly reduce the risk of overhead crane failure. Employing high-quality, reliable  inspecting equipment  is critical for determining whether any mechanical problems are present that may lead to accidents. Inspections should involve checking for cracks, faulty wiring, worn-out ropes, and damaged parts. Crane technicians must also make sure the crane doesn’t exceed rated capacity and that all safety devices are working properly. Initial inspection — This consists of an inspection in accordance with the original manufacturer’s recommendations, as well as documentation of the inspection. Pre-shift inspection — This consists of an inspection in accordance with crane-operator. Frequent inspections ...
Post a Comment
Read more