Skip to main content

Hoist & Trolley: Follow these tips to stay safe

                           Safety First, Safety Last and Safety Always

Danger exists when heavy loads are transported, particularly when the equipment is not being used properly or is poorly maintained. Because accidents and serious injury could result, special safety precautions apply to the operation, maintenance and inspection of LOADMATE hoists and trolleys. Kindly read the below mentioned general care and safety tips to follow before and while operation of LOADMATE Electric Chain Hoist or Electric Trolleys.

Before use:

  • Always read the owner`s manual and safety instructions
  • Always check that the hook latches work properly and replace missing or broken hook latches.
  • Never lift more than capacity shown on the hoist name plate
  • Never operate a hoist if damaged or malfunctioning
  • Never use a twisted , kniked, damaged or stretched load chain
  • Never use a hoist if the hook latch is missing or broken
  • Never use a hoist without a hoist name plate
  • Never use a modified or deformed hook
  • Never use a hoist in an explosive atmosphere

While in Operation:

  • Always make sure that the load is properly seated in the hook
  • Never use a hoist for lifting, supporting or transporting people
  • Never lift or transport loads over or near people
  • Never support a load on the tip of the hook
  • Never use the hoist chain as a sling
  • Never swing a suspended load
 Warning: IMPROPER chain hoist use could result in death or serious injury
Labels:

Comments

  1. Shivika Rana21 June 2019 at 02:02

    This comment has been removed by the author.

    ReplyDelete
  2. PolstonFoster16 September 2020 at 17:42

    Greetings! I know this is kinda off topic nevertheless I'd figured I'd ask. Would you be interested in exchanging links or maybe guest writing a blog article or vice-versa? My blog covers a lot of the same topics as yours and I think we could greatly benefit from each other. If you might be interested feel free to send me an e-mail. I look forward to hearing from you! Great blog by the way!
    fall protection system

    ReplyDelete
  3. cranedq24 February 2021 at 22:11

    Yes, electric wire rope hoist is industry lifting equipment, never can lift person, becase the safety lever can not reach the elevator. It only can be use in production. As one of the electric hoist supplier, we refuse these customers who want to use electric hoist to lift people.

    ReplyDelete

Post a Comment

Popular posts from this blog

How To Install A Electric Chain Hoist?

Things to create positive before installation: The  electric chain hoist  and  trolley   are prepackaged severally. first, check if the number of the  hoist  accords with the number of units in the invoice and if their area unit any damages occurred from the transportation or abnormal packing. Also, Check the plate and see if the rated capacity, lifting speed, lifting height,  cross traveling   speed in addition because the power provide is up to plain. Check if screws of prime hook set are loosed and if the chains are knotted and twisted. 1. Check the track where the hoist and trolley combo is to be mounted: The run track of the hoist adopted is the I- Beam steel. The range of width is 75-180 mm for 1T - 2T and 100-180 mm for 3T-5T. The track for running should be smooth and its swerve radius cannot but the minimum radius stipulated within the plate. the location of axle height at the tip of the track should be mounted a physical property b...
12 comments
Read more

#Industry #Cranes #Surat

For companies requiring overhead lifting operations, taking steps to avoid crane failure is critical to ensuring the safety of workers and overall efficiency of operations. No matter the specific  industry  or type of job site, taking a number of simple precautions can greatly reduce the risk of overhead crane failure. Employing high-quality, reliable  inspecting equipment  is critical for determining whether any mechanical problems are present that may lead to accidents. Inspections should involve checking for cracks, faulty wiring, worn-out ropes, and damaged parts. Crane technicians must also make sure the crane doesn’t exceed rated capacity and that all safety devices are working properly. Initial inspection — This consists of an inspection in accordance with the original manufacturer’s recommendations, as well as documentation of the inspection. Pre-shift inspection — This consists of an inspection in accordance with crane-operator. Frequent inspections ...
Post a Comment
Read more