Skip to main content

What Is A Bridge In EOT Crane

A Bridge EOT crane is mounted on 2 overhead rails or tracks with the most structural component of the crane forming a bridge that may move on the length of the rails. The rails square measure supported by a building structure, creating a bridge crane a permanent installation.


Design of Bridge : The bridge of a EOT Crane is prime running or beneath slung. A prime riding bridge will accommodate heavier masses, however, Associate in Nursing beneath the slung bridge is a lot of versatile, in terms of its ability to transfer masses and interface with railway system systems.

Load capacity: The bridge ought to be labeled on either side with the utmost load capacity and, if an overload device is put in, a load test should be performed. Similarly, all cab-operated or remotely operated bridge cranes should be fitted with a motion alarm to signal bridge movement.

Bumpers and Stops: counting on the traditional operative speed of a bridge crane, bumpers or stops is also required to stop overtravel. Bumpers absorb energy and soften the shock of a traveling bridge, whereas stops bring the bridge to a whole stop.
Labels:

Comments

Post a Comment

Popular posts from this blog

How To Install A Electric Chain Hoist?

Things to create positive before installation: The  electric chain hoist  and  trolley   are prepackaged severally. first, check if the number of the  hoist  accords with the number of units in the invoice and if their area unit any damages occurred from the transportation or abnormal packing. Also, Check the plate and see if the rated capacity, lifting speed, lifting height,  cross traveling   speed in addition because the power provide is up to plain. Check if screws of prime hook set are loosed and if the chains are knotted and twisted. 1. Check the track where the hoist and trolley combo is to be mounted: The run track of the hoist adopted is the I- Beam steel. The range of width is 75-180 mm for 1T - 2T and 100-180 mm for 3T-5T. The track for running should be smooth and its swerve radius cannot but the minimum radius stipulated within the plate. the location of axle height at the tip of the track should be mounted a physical property b...
12 comments
Read more

#Industry #Cranes #Surat

For companies requiring overhead lifting operations, taking steps to avoid crane failure is critical to ensuring the safety of workers and overall efficiency of operations. No matter the specific  industry  or type of job site, taking a number of simple precautions can greatly reduce the risk of overhead crane failure. Employing high-quality, reliable  inspecting equipment  is critical for determining whether any mechanical problems are present that may lead to accidents. Inspections should involve checking for cracks, faulty wiring, worn-out ropes, and damaged parts. Crane technicians must also make sure the crane doesn’t exceed rated capacity and that all safety devices are working properly. Initial inspection — This consists of an inspection in accordance with the original manufacturer’s recommendations, as well as documentation of the inspection. Pre-shift inspection — This consists of an inspection in accordance with crane-operator. Frequent inspections ...
Post a Comment
Read more